1. Uninstall Edius and all its possible components, then reboot.
2. Uninstall Dongl
- go to Device Manager under the 'system devices' and 'USB' right click on all devices with exclamation points (failed installation). Select uninstall. If a box appears to 'remove all soft' or something like that, put a checkmark, click 'yes'
- go to Device Manager under the ' ystem devices' and 'USB' right click on all devices resembling 'Virtual USB Multikey' or something like that. Select uninstall. If a box appears to ' remove all soft 'or something like that, put a checkmark, click' yes '
3. run remove.cmd (possibly with admin rights) and infclean.exe from the archive MultiKey x86 or x64. infclean.exe if something will ask whether to remove it, click 'Y'.
4. Run Dseo13b.exe and choose disable test mode.
5. reboot
*6. Loading Windows press F8 and choose the menu 'download without verifying the signature' (only in this way without using dseo13b)
7. Install the Edius 6
8. do not run the Edius reboot again in 'unsigned'
9. Install Dongle_emulator_with_MultiKey from the archive running install.cmd (possibly with admin rights). If everything is correctly in the tray icon will appear in the 'new device' flash and at the end of the report that the device is installed successfully. Go to in the Device Manager and if there devices is convenient with an exclamation point and USB section is SafeNet devices as in the screenshot. Then perhaps you everything is correct.
10. Restart and again in 'unsigned'
11 launch the utility "dseo13b" then select "Enable Test Mode", afterwards select"Sign a System File", then click "Next",
assign path to C:\Windows\System32\drivers\MultiKey.sys , then select OK to patch, afterwards select OK, then reboot your PC.
12 Then apply *RemoveWatermarkX64* "to remove any trademark, test mode", reboot your PC and ready
13 agar didid ke crack nashode Log off konid. baad az log in dorost mishe.
14. Run Edius 6.05. Enjoy